Diphosgene
| |
| |
| Names | |
|---|---|
| Preferred IUPAC name
Trichloromethyl carbonochloridate | |
| Other names
Trichloromethyl chloroformate, surpalite
| |
| Identifiers | |
3D model (JSmol)
|
|
| ChemSpider | |
| ECHA InfoCard | 100.007.242 |
| EC Number |
|
PubChem CID
|
|
| RTECS number |
|
| UNII | |
CompTox Dashboard (EPA)
|
|
| |
| |
| Properties | |
| C2Cl4O2 | |
| Molar mass | 197.82 g/mol |
| Appearance | liquid at room temperature |
| Density | 1.65 g/cm3 |
| Melting point | −57 °C (−71 °F; 216 K) |
| Boiling point | 128 °C (262 °F; 401 K) |
| insoluble, reacts | |
| Hazards | |
| Occupational safety and health (OHS/OSH): | |
Main hazards
|
highly toxic, maybe corrosive; asphyxiant |
| GHS labelling: | |
 
| |
| Danger | |
| H300, H301, H314, H330 | |
| P260, P264, P270, P271, P280, P284, P301+P310, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P320, P321, P330, P363, P403+P233, P405, P501 | |
| Flash point | 32 °C (90 °F; 305 K) |
| Related compounds | |
Related compounds
|
COCl2, Cl2 |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
| |
Diphosgene is an organic chemical compound with the formula ClCO2CCl3. This colorless liquid is a valuable reagent in the synthesis of organic compounds. Diphosgene is related to phosgene and has comparable toxicity, but is more conveniently handled because it is a liquid, whereas phosgene is a gas.
Production and uses
[edit]Diphosgene is prepared by radical chlorination of methyl chloroformate under UV light:[1]
- Cl-CO-OCH3 + 3 Cl2 —(hv)→ Cl-CO-OCCl3 + 3 HCl
Another method is the radical chlorination of methyl formate:[2]
- H-CO-OCH3 + 4 Cl2 —(hv)→ Cl-CO-OCCl3 + 4 HCl
Diphosgene converts to phosgene upon heating or upon catalysis with charcoal. It is thus useful for reactions traditionally relying on phosgene. For example, it convert amines into isocyanates, secondary amines into carbamoyl chlorides, carboxylic acids into acid chlorides, and formamides into isocyanides. Diphosgene serves as a source of two equivalents of phosgene:
- 2 RNH2 + ClCO2CCl3 → 2 RNCO + 4 HCl
With α-amino acids diphosgene gives the acid chloride-isocyanates, OCNCHRCOCl, or N-carboxy-amino acid anhydrides depending on the conditions.[3]
It hydrolyzes to release HCl in humid air.
Diphosgene is used in some laboratory preparations because it is easier to handle than phosgene.
Role in warfare
[edit]Diphosgene was originally developed as a pulmonary agent for chemical warfare, a few months after the first use of phosgene. It was used as a poison gas in artillery shells by Germany during World War I. The first recorded battlefield use was in May 1916.[4] Diphosgene was developed because the vapors could destroy the filters of the gas masks in use at the time.
Safety
[edit]Diphosgene has a relatively high vapor pressure of 10 mm Hg (1.3 kPa) at 20 °C and decomposes to phosgene around 300 °C. Exposure to diphosgene is similar in hazard to phosgene.
See also
[edit]References
[edit]- ^ Keisuke Kurita and Yoshio Iwakura (1979). "Trichloromethyl Chloroformate as a Phosgene Equivalent: 3-Isocyanatopropanoyl Chloride". Organic Syntheses. 59: 195; Collected Volumes, vol. 6, p. 715.
- ^ Lohs, K. H.: Synthetische Gifte; Berlin (east), 1974 (German).
- ^ Encyclopedia of Reagents for Organic Synthesis, 2001, doi:10.1002/047084289X, hdl:10261/236866, ISBN 978-0-471-93623-7
- ^ Jones, Simon; Hook, Richard (2007). World War I Gas Warfare Tactics and Equipment. Osprey Publishing. ISBN 978-1-84603-151-9.
External links
[edit]- medical care guide.
- NATO guide, includes treatment advice
- material safety data sheet (PDF, for phosgene and diphosgene treated as one).
- MSDS for diphosgene specifically